it en de

Instructions

INSTALLING NANOSUN²

  • Cut 4cm of PVC for each tube: be careful not to cut the electric wire.
  • Cut and remove the PVC’s Aerogel wire.
  • Cut 2cm of PVC between the two tubes in order to create the heat shrink sleeve housing.
  • Insert the heat shrink sleeve.
  • Carry out the thermal shrinking process.
  • Position the Nanosun² tubes as required. N.B. every installation is unique, it is therefore impossible to generalize this installation procedure.
  • Attach Nanosun² with screws directly on the roof or walls. The screws are placed in the central part which has been specifically made for this purpose. This prevents having to use any type of bracket and/or anchoring ring.
  • Once Nanosun² has been positioned and mounted you can proceed with connecting the fittings.